Select Page

Checker Plate Rubber Matting

A very fine looking finish to any area, based on the classic single & 5 bar metal checkerplate design. The left hand picture shows the standard product in rubber, used for flooring entrances, offices or workshops, whilst the right hand product is PVC & has the added benefit of a distinctive edge colour, very useful in warehouses to define walkways. This can also be supplied in mats with a foam backing for anti-fatigue purposes.

Polymer Type: SBR/NR – left hand standard product
Hardness: 66/75º
Density – SG: 1.5
Tensile Strength: 3.0 Mpa
Elongation at break: 150%
Abrasion Resistance: 250 mm³
Temperature Resistance: -20/+70ºC

Polymer Type: PVC – right hand safety product
Hardness: 75º
Density – SG: 1.7
Tensile Strength: 8.0 Mpa
Elongation at break: 200%
Abrasion Resistance: 150 mm³
Temperature Resistance: -20/+100ºC

Thicknesses:- standard single & 5 bar pattern 3mm & 4.5mm
With safety edge strip 4mm thick

Roll Sizes:- Standard 10m x 1000mm, 10m x 1200mm
With safety edge 22.8m x 610mm, 22.8m x 910mm & 22.8m x 1.22m

Colours:- Black/grey, black with grey, black with yellow.

Product can be supplied in full or part rolls, or cut to your exact size.